© ProActive Solutions 2016
ProActive Solutions…
Forklift Certificate of Completion - CSA B335-04 Lift Truck Training Standards…
A ll   operators   must   demonstrate   through   theory   and   practical   hands-on   exposure,   their   ability   to   safely   operate   a   forklift   in   their work   environment(s)   through   Safe   Work   Practices   and   Procedures   as   a   Competent   Forklift   Operator   in   compliance   with   both   the Occupational Health and Safety Act & Regulations stated under the CSA B335.1, 1977. The course also reflects requirement(s) of CSA B335-04 Industrial Lift Truck Operator Training, REAFFIRMED 2004. Employers   are   responsible   to   ensure   the   operator(s)   be   provided   the   required   instruction   to   demonstrate   Forklift   /   Lift   Truck operation Safe Work Practices and Procedures under the Occupational Health and Safety Act and Regulations.
Operation and safety features of the forklift / lift truck the operator will use Operator safety and all site specific safety issues at the work place Maintenance, fuel sources and procedures (battery operation and propane) Written test (maybe retaken as necessary) Workbook provided When written test has been successfully completed, operator(s) will be scheduled for practical hands-on Forklift / Lift Truck operator training and evaluation at their work environment.
Classroom Instruction...                                                      Approximately 4 hours... Final Practical Hands-on Evaluation...  Approximately 30 Minutes Per Operator...
Pre-operational inspection Operating lift truck in work environment This training program is tailored to industrial and warehouse customers, providing an excellent service with minimal work time interference. Within one (1) week after the training is completed, the certificate(s) 8 ½ X 11 and wallet size will be mailed to the company for which the service was rendered.   Location for theory classroom instruction: Client work environment Date & Time for theory classroom instruction: As per client requirement and availabilty Location for hands-on practical demonstration by operator(s): Client work environment Date & Time for hands-on practical demonstration by operator(s): Regular work hours at client work environment Cost: $300.00+ 39.00HST = $339.00 X ____ Participant(s) = $ _______________ Recertification training required every three years.